PLEASE NOTE: Since this pattern is a digital download, once an order has been placed, it cannot be refunded.
A heavy-duty sewing machine or industrial sewing machine is recommended for the Vinyl, Leather, and Cork VERSION. If you do not have one, then it is recommended that you purchase the FABRIC VERSION or the BUNDLE PACKAGE that has both versions!
The Slim Tri-Fold Wallet is the perfect size for those who do not want to carry a large amount in their wallet. This tri-fold wallet features simple piping around the edges and a dual snap closure for more room when it is required. The zippered coin pocket on the back holds plenty of coins with an accordion gusset for easy access. There are 2 different interiors to choose from, one which has the leather/vinyl details and the second which has a full cotton interior for those who don’t like the raw edge look of the leather/vinyl. There is room for 10 credit cards and 2 ID cards, as well as 2 billfold sections. This wallet can fit into a smaller purse when just a simple selection of cards and bills are required.
The instructions in this pattern are written for LEATHER/VINYL OR CORK ONLY. Make sure you have the correct pattern before you order, as there is another pattern for fabric ONLY available.
The skill level on the pattern is set at INTERMEDIATE.
Finished measurements.............7½” W x 4” H x 1” D
Leather Exterior with leather interior detail (Style A)
- 5 sq ft
- 1” x 30” for piping strip (1.5 ounces maximum)
Leather Exterior with full cotton interior (Style B)
- 1 piece 9”W x 14”H, 1 piece 2” x 4”
- 1” x 30” for piping strip (1.5 ounces maximum)
OR
Vinyl Exterior with vinyl interior detail (Style A)
- ½ yard (this will most likely get you 2 wallets and also include enough for the piping)
Vinyl Exterior with full cotton interior (Style B)
- 1 piece 9”W x 14”H, 1 piece 2” x 4”
- 1” x 30” for piping strip (1.5 ounces maximum)
Interior Fabric, Interfacings, Stabilizers, Hardware and Other
Style A and B
- ½ yard of lining fabric - 44” wide fabric.
- 8” of 20”W light weight fusible interfacing
- Decovil Light - 2 pieces - 7 ½” x 12”
- Kraftex - 3 pieces 3” x 8”
- Foam - 1 piece 8” x 12” (thin dish packing type of foam)
- 1 - # 3 nylon zipper - 7” finished size and matching zipper pull for the outside zippered pocket
- Line 20 or Line 24 (for thicker leather) ring snaps - 2 sets (4 per set)
- 14 gauge clear vinyl for ID pockets - 2 pieces 4” x 4”
- 28” of 1.8mm piping cord
NOTIONS /TOOLS:
- Bonded nylon thread Tex 70 #69 OR bonded polyester
- Wonder clips
- Chalk marker/silver pen (Tandy™ leather)/disappearing pen
- Regular pen or pencil
- Rotary cutter & ruler
- Fabric glue (most brands will do, that state “use for fabric”)
- ⅛” , ¼” and ½” DST (double-sided tape)
- ⅛” rivet hole punch and line 20 snap setter for ring snaps
- Poly roller tool
- Poly/rubber mallet
- Teflon foot/walking foot
- Sewing machine
- #18 leather needle
- Scissors
- Tandy™ leather edge paint, Angelus leather paint or one of your choice
- Skewer or edge paint roller tool (optional)
- Exacto knife
- 4 - 5” doll needle
