MINI CLASSIC ZIP AROUND WALLET PDF PATTERN "ADD ON" to the original Classic Zip around wallet pattern
Regular price
$6.00
This pattern is an “ADD ON” to the original Classic zip around wallet which you must have in order to complete the mini version! It is also helpful to have made the original Classic Zip Around Wallet.!
• Full sized pattern pieces for the mini version ONLY
• All instructions that are NOT the same as the original version eg. credit card pockets
• Any add on features – working with a nylon zipper versus a metal one, and adding a wristlet to the wallet
• Three new video tutorials
You will need to have your original pattern as well as this “add on” beside you in order to complete the mini version.
This wallet features a semi-structured exterior that is suitable for cotton decorator fabrics, lightweight vinyl, and leathers. The features of this wallet include: 4 credit card slot pockets, 2 bill pockets, 2 open pocket areas for folded receipts as well as a full depth mini center zippered pouch. This wallet has a high-end designer look with professional finishing touches. There are also instructions for an added wristlet, to make carrying this wallet a breeze when you head out to the store.
Finished measurements - 5” W x 4” H x 1” D
The skill level is listed as INTERMEDIATE
Exterior
• 7” x 10” piece of decorator fabric, soft thin vinyl or light weight leather (.7 oz. - like garment leather or lamb). If you have a bell skiver to thin the edges then you can choose thicker leather like 3 oz.
Interior fabric, stabilizers, hardware and other
• 14” of quilting fabric - 44” wide
• 6” of Kraft Tex - based on 19” width - PREWASHED KRAFT TEX IS NOT RECOMMENDED
• Foam - 1 piece 6” x 9” (⅛” thick is preferred)
• Decovil light (¼ yard based on 36” wide) or Fusible Buckram (1yd of 3”w)
• #5 metal/nylon zipper tape - 1 @ 16”of zipper tape or an 18” finished zipper to cut down MUST BE NO LESS THAN 1¼” WIDE
• #5 metal/nylon zipper pull - 1
• #3 nylon zipper - 1 @ 3½” of zipper tape or a 5” finished zipper to cut down
• Optional for wristlet - ½” D-ring, or corset ring
• Optional for wristlet - ½” swivel hook
NOTIONS /TOOLS
• Bonded nylon thread #69 OR bonded polyester, regular polyester can
be used on fabric.
• Wonder clips
• Chalk marker/silver pen (Tandy leather)/disappearing pen
• Regular pen or pencil
• Rotary cutter & ruler, and self healing mat
• Fabric glue (most brands will do that state “use for fabric”)(water based
is best)
• ¼” and ½” DST (double sided tape)
• Poly/rubber mallet (optional)
• Teflon foot, zipper foot, and edge foot (optional)
• Sewing machine
• Scissor
• Elmer’s spray adhesive for vinyl and fabric
• Iron
• Shipping Tape
• Newsprint
• Tandy EcoWeld for leather
• Small pair of needle nose pliers
• 4” darning needle
PLEASE NOTE: Since this pattern is a digital download, once an order has been placed, it cannot be refunded.
Included in this pattern:• Full sized pattern pieces for the mini version ONLY
• All instructions that are NOT the same as the original version eg. credit card pockets
• Any add on features – working with a nylon zipper versus a metal one, and adding a wristlet to the wallet
• Three new video tutorials
You will need to have your original pattern as well as this “add on” beside you in order to complete the mini version.
This wallet features a semi-structured exterior that is suitable for cotton decorator fabrics, lightweight vinyl, and leathers. The features of this wallet include: 4 credit card slot pockets, 2 bill pockets, 2 open pocket areas for folded receipts as well as a full depth mini center zippered pouch. This wallet has a high-end designer look with professional finishing touches. There are also instructions for an added wristlet, to make carrying this wallet a breeze when you head out to the store.
Finished measurements - 5” W x 4” H x 1” D
The skill level is listed as INTERMEDIATE
Exterior
• 7” x 10” piece of decorator fabric, soft thin vinyl or light weight leather (.7 oz. - like garment leather or lamb). If you have a bell skiver to thin the edges then you can choose thicker leather like 3 oz.
Interior fabric, stabilizers, hardware and other
• 14” of quilting fabric - 44” wide
• 6” of Kraft Tex - based on 19” width - PREWASHED KRAFT TEX IS NOT RECOMMENDED
• Foam - 1 piece 6” x 9” (⅛” thick is preferred)
• Decovil light (¼ yard based on 36” wide) or Fusible Buckram (1yd of 3”w)
• #5 metal/nylon zipper tape - 1 @ 16”of zipper tape or an 18” finished zipper to cut down MUST BE NO LESS THAN 1¼” WIDE
• #5 metal/nylon zipper pull - 1
• #3 nylon zipper - 1 @ 3½” of zipper tape or a 5” finished zipper to cut down
• Optional for wristlet - ½” D-ring, or corset ring
• Optional for wristlet - ½” swivel hook
NOTIONS /TOOLS
• Bonded nylon thread #69 OR bonded polyester, regular polyester can
be used on fabric.
• Wonder clips
• Chalk marker/silver pen (Tandy leather)/disappearing pen
• Regular pen or pencil
• Rotary cutter & ruler, and self healing mat
• Fabric glue (most brands will do that state “use for fabric”)(water based
is best)
• ¼” and ½” DST (double sided tape)
• Poly/rubber mallet (optional)
• Teflon foot, zipper foot, and edge foot (optional)
• Sewing machine
• Scissor
• Elmer’s spray adhesive for vinyl and fabric
• Iron
• Shipping Tape
• Newsprint
• Tandy EcoWeld for leather
• Small pair of needle nose pliers
• 4” darning needle
